We are Taizhou Yingshi Environmental Protection Equipment Co.,LTD (Taizhou Huangyan Chunya Air Cooler Factory) we are major in manufacturing all type air cooler, with the advantage that we have the production line, designing, moulding and manufacturing all by ourselves.
The working concept of the centrifugal evaporative duct air cooler
Using the circulating pump to pumping the water out of the tank, and trough the water distribution system spray evenly on the evaporation filter layer, the outdoor hot air enter the evaporation cooling medium, inthe medium(honeycomb filter layer of special material, so that better cooling efficiency ) to proceeding the fully heat exchange with water.
Through the evaporation wet curtain, which the transfer area is several times lager than the surface, to absorb a lot of heat, so as to achieve the purpose of cooling. The cool and clean air cooled by water evaporation absorbs the heat, pressurized by the low-noise fan into the room, and make the indoor hot air exhaust to the outside, and achieve the purpose of cooling the indoor air.
Features of the centrifugal evaporative duct air cooler
1. The air cooler cooling through the evaporation of water, environmental friendly and energy saving.
2. The air cooler can cool the environment and humidification, bring the fresh air at the same time.
It can realize humidification and bring fresh air while reducing temperature, multi-functional.
3. The low price and operation fee make it the best choice for the customer.
Applications of the centrifugal evaporative duct air cooler
1. The air cooler can be used in the dry and high temperature buildings, such as residence, office, workshop and shopping malls which need cooling.
2. The air cooler can be used in the environmental that needs both cooling and humidification.
The air cooler is suitable to be used in places with strong smell, dust and a lot of catkins such as the textile workshop which needs both cooling and humidification.
3. The air cooler can be used in the air conditioning room while still needs extra fresh air.
The air cooler is suitable to be used in places where traditional air conditioners have been installed but there is not enough fresh air.
The adescription of the parts ofcentrifugal evaporative duct air cooler
Casing: Modified PP plastics adopted, high strength, not easy deformation, anti-ultraviolet ray and ageing resistance
Blower fan: Novel wind blades adopted, sufficient air quantity, high pressure, and effective noise inhibition
Motor: Full aluminum casing adopted, good appearance, light weight, quick heat dissipation, high efficiency, dust and moisture prevention, high quality dual sealed bearings equipped, and high safety and maintenance free
Cooling pad: Imported paper adopted, good water absorption, high evaporation efficiency, specially formulated glue, greenness and environmental protection, good viscosity, no degumming even being soaked all the year around, and a long service life
Water pump: A permanent magnetism footed pump, high efficiency, and overcoming the defect of easy damage caused by water deficiency, idling and scaling
Controller: Manual single speed controller or LCD controller, and also we can use the frequency inverter can control 12 speed also with the remote controller
With an outside dust screen, this can be easily removed and cleaned.
4. Wind outlet type of the air cooler
Top dicharge,
Down discharge
Side discharge
5. The advantage of thecentrifugal evaporative duct air cooler
Centrifugal air cooler, lower noise and higher air pressure, the cool air can blow further, we always choose this model to install the ducting air cooler
We also call this model air cooler duct air cooler, because we also have the floor standing air cooler, roof mounted air cooler, window air cooler, and etc
| Air flow |
30000m³/h |
| Voltage |
1 phase,220V/50HZ-60HZ
3 phase,380V/50HZ
Variable frequency with the inverter |
| Fan type |
Centrifugal air cooler |
| Power |
1.1kw direct-type |
| Noise |
≤79DB |
| Water tank |
30L |
| Controller |
Manual controller 1 speed
Remote controller 12 speed with the inverter |
| Wind outlet type |
Top, down discharge |
| Size |
1.3*1.3*1.18m (Top) |
| Weight |
90 KG |
| Usable area |
150-200m2 |
| Name |
evaporative air cooler |
| HS code |
847960000 |
){kind=link}