Product Description:
1.Product Name:
1.5 kw Industrial cooling system Evaporative Centrifugal Air Cooler with LCD Remote
Centrifugal Air Cooler Specification:
| Model |
CY-18TC/DC/SC |
CY-18TC1/DC1/SC1 |
| Air discharge |
Top/Down/Side |
Top/Down/Side |
| Power |
0.75kW |
1.1kW |
| Air flow |
12000 |
15000 |
| Fan type |
Centrifugal |
Centrifugal |
| Frequency |
50HZ/60HZ |
50HZ/60HZ |
| Voltage |
3 phase 380/220/415V |
1 phase 220V |
| Control system |
Frequency inverter system |
Single speed Controller |
| Size |
1.08*1.08*1.18m |
1.08*1.08*1.18m |
| Air pressure |
235Pa |
250Pa |
| Cooling area |
80-100m³ |
100-120m³ |
| Noise |
70DB |
72DB |
| Water tank |
30L |
30L |
| Water consumption |
10-15L/h |
10-15L/h |
| Weight |
70kg |
70kg |
| Air outlet size |
670*670mm |
670*670mm |
| Cooling pad size |
870*760*100mm |
870*760*100mm |
2.Detailed pictures
Evaporative air cooler is compliment air conditioner, it do not have compressor, it is the cooler between fan and air conditioner. The evaporative cooler uses a high pressure blower to draw outside air through wet filter pads. This filters the air of impurities and lowers the air temperature due to the evaporation of water within the pads. The cooled air is then distributed or directed into the building. The filter pads are wet by a pump which pumps water up to the top of the pads, from where it trickles down. For non air conditioner environment, air cooler will provide us cool air, just like standing in front of water fall.
Evaporative Air Coolers are more effective in areas with maximum relative humidity of 60% or less. Warm, dry air is important for more effective evaporative cooling and the temperature decrease will be greater in drier environments because higher evaporation occurs when the humidity is low. Evaporative Air Coolers produce moisture and can be used to increase humidification in a room. They are ideal for maintaining a cool breeze and increase comfort in homes located in drier regions.
3.Centrifugal Air Cooler Configuration:
Casing: modified PP plastics adopted, high strength, not easy deformation, anti-ultraviolet ray and ageing resistance.
Blower fan: novel wind blades adopted, sufficient air quantity, high pressure, and effective noise inhibition.
Centrifugal wind wheel: super-silent, high hydrostatic pressure, blowing further.
Motor: full aluminum casing adopted, good appearance, light weight, quick heat dissipation, high efficiency, dust and moisture prevention, high quality dual sealed bearings equipped, and high safety and maintenance free.
Cooling pad: imported paper adopted, good water absorption, high evaporation efficiency, specially formulated glue, greenness and environmental protection, good viscosity, no degumming even being soaked all the year around, and a long service life.
Water pump: a permanent magnetism footed pump, high efficiency, and overcoming the defect of easy damage caused by water deficiency, idling and scaling.
Dust net :With an outside dust screen, this can be easily removed and cleaned.
4.Our company
Taizhou Yingshi Environmental Protection Equipment Co.,Ltd
Yingshi air cooler,the leading manufacturer in China,offers all range of evaporative air cooelr to suit your business needs.
We aim at provide all kinds of business establishments with excellent cooling comfort while minimizing expense costs as our products can give up to more than 80% savings on air conditioner electric bills compared to using a traditional air conditioner.
Yingshi evaporative air cooler is an energy saving and environmental-friendly cooling system that reduces actual temperature between 8-15 degrees,use air and water ,fliters and produces continuous flow of natural clean and cool fresh air, with very low maintenance and operating costs which is most beneficial to any business.
About the voltage ,we usually have 110V,220V,240V,380v,415v etc. Almost all the voltage we can produce. The motor's power range from 120W to 4.0KW, and the frequency can be 50HZ or 60HZ.
We have many quality stage products for client choose , different stage price will be different.Of course,we can make OEM products for you and you also can put on your own brand on our products , that's will by your request .
5.FAQ
Q1: Are you the trading company or manufacturer?
A1: WE are the professional evaporative air cooler manufacturer. Have been in this industry for more than 10 years.
We design the air cooler model, make the air cooler mould, produce the air cooler parts all by ourselves.
Q2: Can you offer me better price?
A2: we have many type air cooler, you can choose which you need. Different Configuration price will be different.
Q3: Can you make specific voltage and thickness of cooling pad, and use our own brand?
A3: We can offer 110V-120V, 220V-240V, 380V-415V., frequency 50HZ-60HZ. Cooling pad always we use is 10mm, if you need 12mm, we also can make for you. Brand and air cooler, we can make OEM for you.
Q4: What is the payment term?
A4: Always 30% advance payment/deposit by T/T, and 70% paid before shipment.
Q5: How long is your air cooler warranty?
A5: The warranty time for air cooler is 1 year. If the parts broken in 1 year, we all can offer you new parts in next order.
Q6: How long is the delivery time?
A6: Generally it is within 7-10 days after the deposit. but also depend on the order quantity. we promise offer in 1 month.
Audited Supplier 
){kind=link}
){kind=link}