Product Description
Please comply with below items strictly when using the product. If any happen because of uncorrected usage of the products, the company has no responsibility.
1. The water level should not be over'MAX' scale for any time. In cool mode, the water level should not be under 'MIN' scale.
2. Once the environmental humidity is too high, please use fan function, as cool mode is always with humidity effect.
3. When evaporative cooler is charged with water, make sure that it is without incline or collision when placing or moving to avoid overflow. It is forbidden to turn over the unit in using, prevent accidents.
4. Please do not put anything on the evaporative cooler; Especially covering air outlet is prohibited. Make sure there is no obstacle in 1m distance of the front and back of the unit.
5. When there is no water in tank, the pump won't work in cool mode.
6. The unit has to cut off power supply and plug off during maintenance or clean.
7. Please use a damp cloth (add some detergent) to clean the until. Do not use corrosive solvent and flushing is not allowed.
8. Please plug off the unit immediately, when the unit charged with watet falls down. Only use it after drying it. Otherwise, it may damage the unit...
9. Avoid the air inlet and outlet to approaching wall curtain, etc. Otherwise it will choke air, low effect of the unit.
10. Do not knock or vibrate the unit in using, it may cause automatic stop and need restart.
11. Please plug off when the unit is not in use.
Note: The control panel can't touch water. Because the unit has high voltage, it has to cut off power supply and plug off when clean.
12. If the power cord is broken in order to avoid danger, it is necessary to changed by professional technicians.
13. Attentions when replacing or changing batteries of remote controller:
(1) Replace same specification battery, and notice the polarity.
(2) do not free throw waste batteries, prevent environment pollution.
(3) Please put out battery if not used for long time.
){kind=link}