Our factory have the enterprise production scale, strong technical force, perfect testing instruments. From the mold development, plastic granules to injection molding production, are one-stop service. Spring in the air cooler industry and is also the only company with many years of experience in mold enterprises, relying on the advantages of the air cooler of this enterprise has been constantly to design and processing, so as to achieve the goals of updates faster, create more styles, and guarantee the quality of products. At the same time, we are also the OEM factory the customer could have there own trademark. Our consistent objective is: All consideration for the customer, meet your require is our highest goals.
Cooling principle
Evaporative cooler is a high-tech product developed by the company. It utilize "evaporative cooling" principle completely, adopt high efficient wet curtain evaporator. Therefore the evaporative cooler has better cooling effect, and can filter the air in the dust, improve air quality.
The cooling principle is: Exhaust air by fan from the unit, then it will be negative pressure in side unit; At the mean while, water is sent to water distributor by pump and sprinkle the surface of wet curtain which is designed with special angle; When the hot air passes the surface of wet curtain with water, it will loose considerable heat and get cool, also the air is filtered; Finally, the air become cooling and fresh and the remained water will flow to drainage pan and wait for water cycle.
Installation and usage
1. Open carton box, take out the evaporative cooler carefully.
2. Water supply: Open the left water port of the evaporative cooler by press the cover; Charge the tank with clean water; Watch over the water level by indicator to manage the water volume.
Note:
Do not spill water to motor and peripheral, otherwise it will damage the electric components of the unit.
The water level should not be over"max"line to avio d overflow.
Make sure using clean water.
The advantages of the 3.0kw axial evaporative air cooler
1. Unique chassis design, more stronger
2. RAM adopt independent deadened the noise of the fan cover of RAM, reduce noise
3. Water segregator of special design, only four big water segregator, fault less than using eight water segregator, use more convenient, easier to maintain. In addition, the water segregator is covered with wet curtain, prevent splashing water droplets
4. Using a submersible pump, reduce the maintenance rate, at the same time, can prevent dry chassis no water
5. Unique shell design, very strong, don't need plastic pipe support, savings cost.
6. The new air cooler can install dustproof net, easy to clean.
7. Raw materials produced by our own, to avoid the shortcomings of different color and unstable quality.
| air flow |
25000m3/h |
| voltage |
1phase 220v 50hz/60hz
3phase 380v 50hz/60hz |
| power |
2.2kw |
| fan type |
axial air cooler |
| noise |
<79db |
| water tank |
30L |
| controller |
manual controller 1 speed
remote controller 12 speed |
| wind outlet type |
down/top discharge |
| size |
1.3*1.3*0.98m |
| weight |
85kg |
| usable area |
150-200m3 |
){kind=link}