Internal configuration of the 1.1kw New Evaporative Industry Ai Cooler
PP injection shell
5090Wet curtain
High quality aluminum shell motor
Low noise wind turbines
Large flow high pump
Electric discharge valve
The differential floating ball valve
Standard electronic control
Cooling principle
Evaporative cooler is a high-tech product developed by the company. It utilize "evaporative cooling" principle completely, adopt high efficient wet curtain evaporator. Therefore the evaporative cooler has better cooling effect, and can filter the air in the dust, improve air quality.
The cooling principle is: Exhaust air by fan from the unit, then it will be negative pressure in side unit; At the mean while, water is sent to water distributor by pump and sprinkle the surface of wet curtain which is designed with special angel; When the hot air passes the surface of wet curtain with water, it will loose considerable heat and get cool, also the air is filtered; Finally, the air become cooling and fresh and the remained water will flow to drainage pan and wait for water cycle.
Installation and usage
1. Open carton box, take out the evaporative cooler carefully.
2. Water supply: Open the left water port of the evaporative cooler by press the cover; Charge the tank with clean water; Watch over the water level by indicator to manage the water volume.
Note:
Do not spill water to motor and peripheral, otherwise it will damage the electric components of the unit.
The water level should not be over"max"line to avio d overflow.
Make sure using clean water.
| air flow |
18000m3/h |
| voltage |
1 phase 220v,50HZ/60HZ
3 phase 380v,50HZ/60HZ |
| |
|
| fan type |
axial |
| power |
1.1kw |
| noise |
<70DB |
| water tank |
25L |
| controller |
remote controller 12 speed / manual controller 1 speed |
| wind outlet |
top |
| size |
1.08*1.08*0.95m |
| weight |
50kg |
| usable area |
100--150m2 |
| |
|
Audited Supplier 
){kind=link}
){kind=link}